How to check if the Lock Controller io wiring is working properly?

(4) 2022-09-07 06:49:00.0

To check the wiring between the Lock controller io and the connected devices.

Outputs test

  1. Briefly press the “TEST” button to activate an output for 1 second.
  2. Press again to change the output (OUT1 > OUT 2 > OUT3 > OUT1, etc.).

Inputs test

  1. Press the “TEST” button for 2 seconds, until the orange LED flashes.
  2. Activating the IN1 input activates the OUT1 output. The orange LED remains fixed until the IN1 input is deactivated (same as for the IN2 and IN3 inputs).
  3. To exit the test mode, press the “TEST” button twice.