You want to install a magnetic end-limit (9027387) on a Somfy gate opener Elixo 3S RTS or IO.

Identify your electronic board version

To know if some actions are required to connect the magnetic end-limit on the motorization you should identify which version of electronic board is installed on the gate opener:

Since 2023

​​​​​​​

Fully compatible with magnetic end-limit

• Plug the end-limit connector directly

Before 2023

Actions are required to use magnetic end-limit on this version

• Follow the different steps bellow.

 

Required actions for pre-2023 version

 

Cut wires from end-limit connector

Pull 20cm of grey sheath out:

 

 

Bare the wires on 10mm:

 

Plug the end-limit connector following this draw:

• Connector 8: Green wire
• Connector 23: Orange wire
• Connector 29: White wire
• Connector 30: Grey wire
• Connector 31: Yellow wire

 

Select the switch position according to the position of the motor: