How to uninstall the indoor monitor to connect the Connectivity module?

(4) 2023-12-08 08:38:00.0

1. Unhook the indoor monitor from its mounting wall by pulling it upwards.

2. Leave the mounting wall in place.

3. Memorize or take a photo of the connection on the back of the monitor, in order to locate the power cables (DC 24V terminal block) and the outdoor panel (CS/Call station terminal block).

 

 

4. Without unscrewing the blue cable connectors , unplug all the connectors present to release the monitor.

 

If you have a second monitor, it is not compatible with the connectivity module. It will no longer be possible to answer to a visitor's call. However, you can continue to use it to control Somfy equipment via radio (RTS/io) and launch TaHoma® scenarios (VR500 PRO io monitor only).

 

5. Identify the 2 power wires connected to the DC 24V terminal block, noting the polarity (+ and -) and identify the 2 wires from the door panel connected to the CS/Call station terminal block. Polarity does not matter.

 

 

6. Use the screwdriver provided to unscrew the blue connectors from the identified cables. These will no longer be used.