Door Keeper

Leave SECURITY ISSUES AT THE DOOR.

Connected lock motor with integrated close and intrusion-attempt detectors.
Front doors: vulnerable to security issues
According to a study by the French Ministry of the Interior, 60% of burglars get in through the front door*.
The new Somfy connected lock motor gives you more freedom and especially more security. Your door goes from being an access point to an active element of the home security setup.

*Source : Living Environment and Safety - Ministry of the Interior 2018.

GOOD REASONS TO INSTALL DOOR KEEPER

<font color= FOR YOU, THE PROFESSIONALS" />

FOR YOU, THE PROFESSIONALS

- Quick and simple installation without drilling or wires
- Easy to set up without a smartphone or internet
- Can only be set up using the motor button to adjust limit switches, pair the badge reader/keypad, generate a code and add badges
See product sheet

FOR YOUR CLIENTS

SOMFY KEYS APP

Greater peace of mind

Check and lock the door remotely using the Somfy Keys app. Or check it's closed at any time.

Better security

- Integrated close detector
- IntelliTAG™ technology: detects unusual vibrations before a burglar manages to break in
- Sends an intrusion alert to your phone

More freedom

Manage home access using the Somfy Keys app (generate a temporary code, open remotely, etc.)

Greater simplicity

- Alerts about comings and goings at your home
- A wide range of accessories: badge, keypad, bracelet, smartphone, key, etc.

Compatible with most front doors

- Locks with a cylinder that meets European standards
- Multi-point locks
- Door with and without an outside handle
Check and see if your door is compatible
COMPATIBLE WITH TAHOMA® SWITCH
ONE MORE STEP TOWARDS A CONNECTED HOME

COMPATIBLE WITH TAHOMA® SWITCH

For example, you can create a "Going Out" scenario which automatically shuts the blinds, turns on the alarm and locks the front door.
Find out more

FAQS

How to install the V®500 Connect's outdoor panel?

(3) 2023-12-08 08:20:00.0

 

 

We advise you to install the door station at a height of about 1.60 m and to avoid placing the camera opposite a light source, as this may reduce the quality of the images/videos taken of the visitors.

 

1. Route all the cables in the rain shield, then fasten it to the wall/pillar.

 

2. On the door station, connect:

  • the cable of the indoor monitor to the terminal blocks M+ and M-. The polarity is irrelevant (A)
  • the cable from the electric latch of the pedestrian gate to the terminal blocks L+ and L- (B)
  • the cable from the gate drive to the dry contact output (COM and NO) (C)

 

 

 

Using the screwdriver, press the square notch, insert the cable then release:

 

 

 

3. Place the door station in the rain shield and screw it in using the assembly key supplied (E).

 

 

4. Install the name plate:

  1. Turn the call button anticlockwise to the engraved marking then remove.
  2. Remove the round membrane to access the name plate label.
  3. Write your name on the white label using a permanent marker, then refit the label and its cove in the housing.
  4. Reassemble the call button on the door station using the marks, and then turn clockwise until it locks.

 

 

Tell your clients about it

Download the com kit

Door Keeper
Brochure
Video
Pictures